Name: Standard Grade 270 mm Trunk Splitter 3Cr13 Alloy Steel Bonsai Tools
Brand: TianBonsai Tools
SKU: SN-TS-270
Price: 42.12 USD
Availability: InStock

Product Details
Name: trunk splitter SN-TS-270
Brand: TianBonsai

Quality: standard grade

Material: alloy steel (3Cr13)
Overall length: 270 mm
Surface Treatment: sanding
Edge Hardness: HRC50 quenching by the high frequency coil.

Cutting function: cutting wet branches with a diameter less than 25 mm.

Standard grade bonsai tools

To popularize the bonsai art, TianBonsai supplying the standard grade bonsai tools to the bonsai beginner, it's material is 3Cr13 alloy-steel, handmade by skilled worker from TianBonsai. The 3Cr13 alloy steel, which contains 0.3% Carbon and 1.3% Chromium, after quenching treatment, it's hardness is over HRC50. this grade tools also have nice quality and complete function. it would let you have the nice tools for cross the threshold of the bonsai art easily.

Precautions for the use of bonsai tools:
1. Our tools have very sharp blades. Please pay attention to the safety of users and nearby personnel when using it. Do not arbitrarily place tools on high places. If the tool is accidentally dropped, it may cause injury to personnel and tools.
2. Choose a bonsai tool of the right size. When pruning, the diameter of the branches should not exceed the cutting limit specified by the cutter, otherwise the cutter will be easily damaged.
3. Don't use bonsai tools to trim dry branches, otherwise it is easy to damage the tool blades.
4. The fine sand particles in the flower mud will damage the blade of the tool, so when using a bonsai tool to trim branches, pay attention to whether there is dirt on the branches. If there is dirt on the branches, clean them with a small brush before pruning.
5. Pay attention to protect the tool tip, even a slight frontal collision will cause damage to the tool tip.
6. Please maintain the tools after the work is completed.

Precautions for cleaning and maintenance of bonsai cutter and scissors:
1. After the work is completed, clean the sawdust and flower mud on the surface of the tool with clean water.
2. Wipe off water stains with a clean cloth and wait for it to dry.
3. Use a small amount of general anti-rust oil to drop on the tool riveting shaft.
4. Wipe off the leaking anti-rust oil with a clean cloth.
5. Store tools indoors.