X
EN / USD

Select Your Language / Currency

Save
Shopping Cart 0 Items 0.00
Your position: Home / Customized by high-end customers

master grade 215 mm root cutter branch cutter straight edge cutter 5Cr15MoV Alloy Steel bonsai tools

1469568728
Sold:38
Price:
Quantity:
-
+
(48 available)
Please select the information you wantX
  • Description
  • Size Chart
  • Measurement
  • Reviews
Name: root cutter JTS-20
Brand:TianBonsai
Material: alloy steel (5Cr15MoV)
Overall length: 215mm
Surface Treatment: sanding
Edge Hardness: HRC58, quenching by the high frequency coil
Quality: master’s grade, handmade by the master worker from TianBonsai, have the best quality in our tools.
Function Detail: This root cutter have very strong and sharp blades, was designed for cutting the roots of bonsai.
Cutting Function: Cut wet branches less than 10 mm in diameter.
 
Master's Grade (there is a stamp mark in the handle as above picture)
Master's Grade tools, were manufactured via 5Cr15MoV alloy-steel.
5Cr15MoV alloy-steel have high intensity, strong tenacity and wearability, which contains Molybdenom, Vanadium, 0.5% Carbon and 1.5% Chromium, after quenching treatment, it's hardness is over HRC58, have high intensity, strong tenacity and wear-resistant.
Precautions for the use of bonsai tools:
1. Our tools have very sharp blades. Please pay attention to the safety of users and nearby personnel when using it. Do not arbitrarily place tools on high places. If the tool is accidentally dropped, it may cause injury to personnel and tools.
2. Choose a bonsai tool of the right size. When pruning, the diameter of the branches should not exceed the cutting limit specified by the cutter, otherwise the cutter will be easily damaged.
3. Don't use bonsai tools to trim dry branches, otherwise it is easy to damage the tool blades.
4. The fine sand particles in the flower mud will damage the blade of the tool, so when using a bonsai tool to trim branches, pay attention to whether there is dirt on the branches. If there is dirt on the branches, clean them with a small brush before pruning.
5. Pay attention to protect the tool tip, even a slight frontal collision will cause damage to the tool tip.
6. Please maintain the tools after the work is completed.
Precautions for cleaning and maintenance of bonsai cutter and scissors:
1. After the work is completed, clean the sawdust and flower mud on the surface of the tool with clean water.
2. Wipe off water stains with a clean cloth and wait for it to dry.
3. Use a small amount of general anti-rust oil to drop on the tool riveting shaft.
4. Wipe off the leaking anti-rust oil with a clean cloth.
5. Store tools indoors.

 

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login

You May Like

logo
Message Us